| Weight |
760 kg, note floor load capacity |
| Dimensions Housing, Transport (H x W x D) |
1800 x 2020 (total) x 1020 (total) mm |
| Dimensions Housing, Installation (H x W x D) |
2800 x 2020 (total) x 1300 mm |
| Power supply: Type |
Tri-phase four-conductor system (L1-L3/N/PE) |
| Operating voltage |
400 VAC, 50/60 Hz |
| Control voltage |
24 VDC |
| Power rating |
approx. 5.2 kW |
| Fuse |
32 A |
| Water |
Connections for cleaning and demineralized water max. 5 bar (0.5 Mpa) set to approx. 3-4 bar for MediPrep max. 60 °C Connection for 1/2-inch hose |
| Connection for waste water with low contamination level |
Connection for 3/4-inch hose |
| Connection for waste water with high contamination level |
Connection for 3/4-inch hose |
| Height of the waste water connections |
Max. 20 cm above the ground |
| Connection for media tank |
Norprense® hose ID 1/4-inch |
| Doors |
Two-leaf, makrolon, transparent, safety lock |
| Robot Supplier |
Festo |
| Model |
RP (room portal) |
| Frame material |
Aluminium |
| Operating range |
1420 mm x 540 mm x 600 mm (xyz) |
| Interfaces (control) |
ModBus TCP/ EtherCAT |
| Interfaces (configuration) |
Standard Ethernet LAN |
| Angle of rotation |
180° (electrical rotary drive) |
| Robotic tools |
Filling and cleaning tools, pH probe |
| Number of testers |
1 |
| Test stations |
7 in a row |
| Test station connections |
With toothed belt and gear wheel |
| Agitators (shaft and stirring elements) |
Stainless steel 1.4571 (316Ti) |
| Stirring element |
Paddle (standard), basket (optional) |
| Operation |
DC motor with speed sensor, sequential agitator switch (stepper motor) |
| Vessel |
Glass (borosilicate) |
| Evaporation |
Less than 1% in 24 hours |
| Time measurement |
Time in realtime, tolerance ± 1 sec. |
| Temperature measurement |
PT 100 sensor |
| Temperature in the vessel |
37 °C ± 0.5 °C; temperature range +4 °C (RT) to 40 °C ± 0.5 °C |
| Stirring speed |
25 min ± 2 min up to 200 min ± 4 min |
| Water bath |
Acrylic glass |
| Water bath volume |
Approx. 30 l |
| SPS |
CodeSys Version 3.5 |
| Other connections |
PT 100 connection, heating connection and interface |
| Control/operation |
Controller, monitor, keyboard, mouse, WIN software |
| Software |
ERWEKA Disso.NET software, video software |
| Heating system |
Flow-through, type ERWEKA DH 1520 |
| Heating capacity |
1500 W |
| Flow-through speed |
6 l/min |
| Interface |
RS 232 |
| Automatic production/degassing/heating |
MediPrep (ERWEKA) |
| Production |
Made from up to 6 concentrates + de-ionised water or pre-mixed medium; Vmax MediPrep: 8000 ml |
| Degassing |
Vacuum > 190 mbar absolute |
| Heating |
Flow-through heating 1500 W, max 40 °C |
| Scale |
SST with load cell |
| Pump type |
Piston pump, ceramic head |
| Pump Interface |
RS-232 |
| Vessel filling |
250 ml - 1000 ml +- 1% (volumetric filling) |
| Magazines, basket |
Two, each with 6 x 10 rows - USP Method 1 (only for 40-batch) |
| Magazines, tablet holder |
Tablet size max. ⌀ 35 mm |
| HPLC device |
max. 2 HPLC systems |
| Automatic filter changer (opt.) |
AFC (ERWEKA) |
| Flow-through cuvette (opt.) |
1-10 mm |
| Cleaning: Suction pump |
CP 7+ diaphragm pumps |
| Cleaning: Flow-through |
Approx. 1000 ml/min |
| Cleaning: Hoses |
Norprene® |
| Protection type |
I/EN 61140 |
| Protection class |
IP 21/IEC 529 |
| Ambient temperature in operation |
+10 °C to +30 °C (ambient temperature at least 5 °C lower than test temperature) |
| Storage and transport temperature |
+5 °C to +40 °C |
| Relative humidity |
25 to 80 % non-condensing |
